Ipamorelin is a five-amino-acid research peptide with a molecular weight of about 711.9 g/mol, and it rarely ships alone. Before buying ipamorelin, look for a lot-specific certificate that confirms identity, purity, and quantity for each peptide separately, names the CJC-1295 variant, and matches the lot number printed on the vial. Anything less leaves the ratio as a guess. Match your next vial to its paperwork in the Alamo Peptide Labs COA vault before you order.
Ipamorelin has one of the cleanest résumés in peptide research. In 1998, a Novo Nordisk team described it as the first selective growth hormone secretagogue. Since then, the five-amino-acid chain has become a reference point for studying the ghrelin receptor. Demand has followed, with roughly 30,000 searches for it every month. Scan the supplier listings, though, and something odd stands out: ipamorelin almost never ships on its own. It usually shares a vial with CJC-1295, a peptide nearly five times its size. That pairing doubles the work a certificate has to do. Two compounds need two identity checks, two purity results, and two measured amounts.
What Is Ipamorelin? The Peptide Behind the Label
Ipamorelin is a synthetic pentapeptide, meaning a chain of five amino acids. Its sequence reads Aib-His-D-2-Nal-D-Phe-Lys-NH2. Several of those building blocks are unusual. Aib is a non-standard amino acid; two residues use the mirror-image "D" form, and the chain ends in an amide cap. Those tweaks help the molecule resist breakdown and hold its shape.
The figures researchers check most often are the formula, C38H49N9O5, and the molecular weight of roughly 711.85 g/mol. The compound also has CAS number 170851-70-4, and its PubChem record (CID 9831659) provides the full structure. Keep that 711.9 figure handy. It becomes the yardstick for checking identity on any certificate.
What Does Ipamorelin Do in Research?
In the lab, ipamorelin is known for being selective. It binds the growth hormone secretagogue receptor (GHS-R1a), the same receptor that ghrelin uses. The 1998 paper that first described it reported that ipamorelin triggered growth hormone release in animal models with potency similar to that of GHRP-6. The real surprise was what it left alone. Earlier secretagogues also elevated stress hormones, including ACTH and cortisol. Ipamorelin did not significantly raise them, even at doses far above those required to elicit a growth hormone response.
That clean profile is why the peptide turns up so often in receptor and endocrine signaling studies. It gives researchers a way to probe a single pathway with less noise from neighboring pathways. Ipamorelin is not an approved drug, and research-grade material is sold for laboratory use only.
Why Ipamorelin Peptide Vials Usually Come Blended
Here's where buying ipamorelin gets tricky. Most listings pair it with CJC-1295, a lab-made analog of growth hormone-releasing hormone (GHRH). The two peptides act on different receptors along the same pathway, so research often studies them side by side.
CJC-1295 comes in two forms, and the difference matters. The DAC version carries an extra chemical group that latches onto albumin in the blood, which dramatically extends its activity. In a 2006 study of healthy adults, its half-life ranged from 5.8 to 8.1 days. The version without DAC, often called Modified GRF (1-29), is lighter and far shorter-acting. Blends usually contain the no-DAC form, but a certificate should state it outright.
The table shows how far apart the two blend partners sit.
|
Property |
Ipamorelin |
CJC-1295 (no DAC) |
|
Peptide type |
Growth hormone secretagogue |
GHRH analog |
|
Chain length |
5 amino acids |
29 amino acids |
|
Approximate molecular weight |
711.9 g/mol |
3,368 g/mol |
|
Target receptor |
GHS-R1a (ghrelin receptor) |
GHRH receptor |
|
Identity check on the certificate |
Observed mass near 711.9 |
Observed mass matching the stated variant |
Notice the weight gap. Ipamorelin has roughly one-fifth the mass of CJC-1295, so a vial split 5 mg and 5 mg holds close to five ipamorelin molecules for every CJC-1295 molecule. A milligram label describes mass. The molecular ratio your study works with is an entirely separate number.
What a Blend Certificate Should Show for Each Peptide
A certificate of analysis (COA) for a single peptide answers three questions: is it the right molecule, how pure is it, and how much is there? A blend certificate has to answer all three twice, once for each component. Alamo Peptide Labs sends every lot to an independent analytical laboratory before release, and that level of external testing is the baseline to expect from any supplier.
Identity by Mass Spectrometry, One Peptide at a Time
Mass spectrometry weighs molecules. On a blend certificate, it should report an observed mass that matches ipamorelin and a separate observed mass that matches the stated CJC-1295 variant. One confirmed mass covers one peptide, never both.
Purity Reported as Separate HPLC Peaks
Reverse-phase HPLC separates a sample into peaks. In a blend, ipamorelin and CJC-1295 should appear as two distinct, labeled peaks, each with its own purity figure. Impurity peaks belong on the report too.
Quantity Measured Per Component
This is the line many certificates skip. The report should state how many milligrams of ipamorelin and CJC-1295 were measured, ideally against a reference standard for each. Net peptide content, which accounts for the salt and moisture that ride along with any freeze-dried peptide, belongs here as well.
A Lot Number That Ties It Together
Every result above only matters if it describes the vial in hand. The certificate's lot number should match the vial label exactly, and documentation should never carry over from an older batch.
Why a Single Combined Assay Can't Confirm the Ratio
Take a certificate that reads "CJC-1295/Ipamorelin 10 mg, purity 99%." It sounds reassuring. Yet that one result can't show whether the vial holds 5 mg of each peptide, 7 mg and 3 mg, or something else.
There are two reasons. First, a combined purity figure is usually calculated from total peak area, so it rates the cleanliness of the whole mixture and says nothing about the split. Second, HPLC detectors read peptides by how much UV light they absorb, and two different peptides don't absorb light equally per milligram. CJC-1295 has far more peptide bonds than ipamorelin, while ipamorelin carries a bulky aromatic ring system. Peak area can't be turned into milligrams without calibrating each peptide against its own standard.
The upshot: the ratio becomes a fact only when each component is identified and measured on its own. A total weight plus one purity figure confirms that something clean is in the vial. The recipe remains unconfirmed.
Where to Buy Ipamorelin: What to Require Before Ordering
Any supplier worth a purchase order should clear every item on this list before money changes hands.
- A lot-specific certificate you can review before buying, not only after delivery
- A separate mass spectrometry identity result for ipamorelin and for CJC-1295
- Separate HPLC purity figures, one per peptide
- Measured milligrams for each component, plus net peptide content
- The CJC-1295 variant is named clearly (DAC or no DAC)
- The testing lab's name and the analysis date
- A lot number on the vial that matches the certificate exactly
- Clear research-use-only labeling
If a certificate leaves a gap, take the lot number to the supplier's support team and ask about that specific result. A precise answer is a good sign. A generic PDF or no reply says plenty, too.
Alamo Peptide Labs supplies ipamorelin in its CJC-1295/Ipamorelin 10 mg blend, split evenly between the two peptides at 5 mg each. Every vial carries a lot number, and the certificate for that lot is available for review before an order is placed. That means each item on the checklist above can be held up against the exact lot on the shelf.
Bench Questions, Straight Answers
Can you buy ipamorelin on its own?
Some suppliers stock standalone vials, but blends with CJC-1295 make up much of the market. Whatever the format, the checks scale with the number of peptides in the vial.
What should an ipamorelin peptide vial look like?
Research peptides usually arrive as a white, freeze-dried powder or cake in a sealed vial, labeled with the compound, amount, and lot number.
Does "10 mg" on a blend label mean 10 mg of ipamorelin?
Usually not. It typically refers to the total peptide across both components. The certificate should break that total into separate amounts.
Is ipamorelin meant for human use?
No. Research-grade ipamorelin is not an approved drug and is sold strictly for laboratory research.
Two peptides deserve two sets of proof. Review the testing documentation in the Alamo Peptide Labs COA library, then explore the CJC-1295/Ipamorelin 10 mg research blend, containing 5 mg of CJC-1295 and 5 mg of ipamorelin.